Display RSTP Information for a Port

Perform the following procedure to display the RSTP-related configuration information for the selected port.

Procedure

Enter Privileged EXEC mode:

enable
Display the RSTP information for a selected port:

show spanning-tree rstp port statistics [{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}]

Example

Display the RSTP information for a selected port:

Switch:1# show spanning-tree rstp port statistics 1/4

========================================================================
                       RSTP Port Statistics
========================================================================
Port Number                       : 1/4
Number of Fwd Transitions         : 0
Rx RST BPDUs Count                : 0
Rx Config BPDU Count              : 0
Rx TCN BPDU Count                 : 0
Tx RST BPDUs Count                : 9
Tx Config BPDU Count              : 0
Tx TCN BPDU Count                 : 0
Invalid RST BPDUs Rx Count        : 0
Invalid Config BPDU Rx Count      : 0
Invalid TCN BPDU Rx Count         : 0
Protocol Migration Count          : 0

Variable definitions

Use the data in the following table to use optional parameters with the show spanning-tree rstp port statistics command.


Variable	Value
`{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}`	Identifies the slot and port in one of the following formats: a single slot and port (slot/port) a range of slots and ports (slot/port-slot/port) a series of slots and ports (slot/port,slot/port,slot/port) all ports on the same slot (slot/all) all ports on the switch (all) If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.