Clear MKA Statistics

About this task

You have the option to clear MKA statistics for all ports, or clear MKA statistics for a specific port. Clearing MKA statistics can be useful for debugging purposes.

Procedure

Enter Global Configuration mode:

enable

configure terminal
Clear all MKA statistics:

macsec mka clear-stats
Optional: Clear MKA statistics for a specific port:

macsec mka clear-stats port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Example

Clear all MKA statistics:

Switch:1>enable
Switch:1#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Switch:1(config)#macsec mka clear-stats

Clear MKA statistics for a specific port:

Switch:1>enable
Switch:1#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Switch:1(config)#macsec mka clear-stats port 1/3

Variable Definitions

Use the data in the following table to use the macsec mka clear-stats command.


Variable	Value
port `{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}`	Identifies the slot and port in one of the following formats: a single slot and port (slot/port) a range of slots and ports (slot/port-slot/port) a series of slots and ports (slot/port,slot/port,slot/port) all ports on the same slot (slot/all) all ports on the switch (all) If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.