Display IS-IS Remote Area Configuration

About this task

Perform this procedure to display the IS-IS remote area configuration on the switch.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. Display IS-IS remote configuration:

    show isis remote

Example

Displaying IS-IS remote area information:

Switch:1>show isis remote
==========================================================================================
                             ISIS Remote Area Info
==========================================================================================
                            AdminState : enabled
                             System ID : 209e.f77e.2086
                     Num of Interfaces : 4
                 Num of Area Addresses : 1
              Dynamically Learned Area : 49.0002
                  Multi-Area OperState : designated
                 Designated BN Hostname: BN4435
          Designated BN Home System ID : 0010.7400.4435
        Designated BN Remote System ID : 0020.7400.4435