Reset System Functions
About this task
Reset system functions to reset all statistics counters on the console port.
Procedure
Example
Reset the statistics counters:
Switch:1>enable Switch:1#sys action reset counters Are you sure you want to reset system counters (y/n)? y
Variable Definitions
The following table defines parameters for the sys action command.
Variable |
Value |
---|---|
reset {console|counters} |
Reinitializes the hardware universal asynchronous receiver transmitter (UART) drivers. Use this command only if the console connection does not respond. Resets all the statistics counters in the switch to zero. Resets the console port. |