View VLAN Information

View the VLAN information to display the basic configuration for all VLANs or a specified VLAN.

Procedure

To enter User EXEC mode, log on to the switch.
View VLAN information:

show vlan basic <1-4059>
View advanced parameters:

show vlan advance <1-4059>

Example

View VLAN information for VLAN 2:

Switch:1>show vlan basic 2
=====================================================================================
                                Vlan Basic
=====================================================================================
VLAN                           INST
ID    NAME          TYPE         ID  PROTOCOLID SUBNETADDR  SUBNETMASK  VRFID  ORIGIN

-------------------------------------------------------------------------------------
2     VLAN-2       byPort       0   none       N/A          N/A	      0     CONFIG

View VLAN information:

Switch:1>show vlan basic
============================================================================================
                                 Vlan Basic
============================================================================================
VLAN                            INST
ID    NAME           TYPE         ID  PROTOCOLID SUBNETADDR  SUBNETMASK   VRFID  ORIGIN

-------------------------------------------------------------------------------------------
1     Default        byPort       0   none       N/A          N/A	    0      CONFIG

2     abc            byPort       0   none       N/A          N/A	    0      CONFIG

3     VLAN-VRRP      byPort       0   none       N/A          N/A	    0      CONFIG

4     VLAN-6         byPort       0   none       N/A          N/A	    1      CONFIG

5     VLAN-7         byPort       0   none       N/A          N/A	    1      CONFIG

6     VLAN-8         byPort       0   none       N/A          N/A	    1      CONFIG

19    VLAN-9         byPort       0   none       N/A          N/A	    0      CONFIG

10    VLAN-10        byPort       0   none       N/A          N/A	    0      CONFIG

11    VLAN-11        byPort       0   none       N/A          N/A	    0      CONFIG

12    VLAN-12        byPort       0   none       N/A          N/A	    0      CONFIG

13    VLAN-13        spbm-bvlan   62  none       N/A          N/A	    0      CONFIG

14    VLAN-14        spbm-bvlan   62  none       N/A          N/A	    0      CONFIG
15    VLAN-15        byPort       1   none       N/A          N/A	    0      CONFIG

--More-- (q = quit)

View advanced parameters:

Switch:1>show vlan advance
================================================================================
                                  Vlan Advance
================================================================================
VLAN             IF    AGING MAC                USER
ID    NAME       INDEX TIME  ADDRESS            DEFINEPID ENCAP  DSAP/SSAP
--------------------------------------------------------------------------------
2     Default 2050  0     00:24:7f:9f:6a:03  0x0000

Variable Definitions

Use the data in the following table to use optional parameters with the show vlan basic and show vlan advance commands.


Variable	Value
`<1-4059>`	Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.