Enable Energy Saver or EEE on Ports
About this task
Perform this procedure to enable Energy Saver or EEE on one or more ports.
Procedure
- In the navigation pane, expand .
- Select Energy Saver.
- Select the Ports tab.
-
Enable either Energy Saver or EEE:
-
To enable Energy Saver, in the EnergySaverEnabled column, double-click the field associated with the specific ports, and then select true.
-
To enable EEE, in the EnergySaverEEEEnable column, double-click the field associated with the specific ports, and then select true.
-
- Select Apply.
Energy Saver Field Descriptions
Use the data in the following table to use the Energy Saver tab.
Name |
Description |
---|---|
Port |
Specifies the port number. |
EnergySaverEnabled |
Configures whether Energy Saver is enabled on the specific port. |
EnergySaverPoEStatus |
Specifies Energy Saver PoE status for the specific port. |
EnergySaverEEEEnable |
Configures whether EEE is enabled on the specific port. |