View a Summary of BGP Configurations

1. To enter User EXEC mode, log on to the switch.
2. Display summarized information about BGP:

   show ip bgp summary [vrf WORD<1–16>] [vrfids WORD<0–512>]

Example

The following example shows partial output for the show ip bgp summary command.

Switch:1>show ip bgp summary vrf vrf1

====================================================================================================
                           BGP Summary - VRF vrf1

====================================================================================================

                                     BGP version - 4
                                        local-as - 22610
                                      Identifier - 27.82.217.1
                                  Decision state - Idle
                   The total number of routes is   0


BGP NEIGHBOR INFO :

   NEIGHBOR       RMTAS     STATE    HLDTM  KPALV  HLDCFG KPCFG   WGHT  CONRTY ADVINT UPTime
----------------------------------------------------------------------------------------------------
192.0.2.1        22620      Active      0     0     180    60    100   120    5     0 day(s), 07:25:09
Total bgp neighbors: 1

BGP CONFEDERATION INFO :
confederation identifier 0
confederation peer as

--More-- (q = quit)