Configure RADIUS SNMP

About this task

Configure RADIUS SNMP parameters for authentication and session times.

Procedure

  1. In the navigation pane, expand Configuration > Security > Control Path.
  2. Select RADIUS.
  3. Select the RADIUS SNMP tab.
  4. Select Enable to enable RADIUS SNMP.
  5. In AbortSessionTimer, type the period after which the session expires in seconds.
  6. In ReAuthenticateTimer, type the period of time the system waits before reauthenticating in seconds.
  7. Select AcctEnable to enable RADIUS accounting for SNMP.
  8. In UserName, type the RADIUS SNMP user name.
  9. Select Apply.

RADIUS SNMP Field Descriptions

Use the data in the following table to use the RADIUS SNMP tab.

Name

Description

Enable

Enables or disables timer authentication on the server. The default is true.

AbortSessionTImer

Specifies the allowable time, in seconds, before aborting the RADIUS SNMP server session (30 to 65535). The default is 180.

ReAuthenticateTimer

Specifies the time, in seconds, between reauthentications of the RADIUS SNMP server (30 to 65535). The default is 180.

AcctEnable

Enables or disables the RADIUS SNMP session timer.

UserName

Specifies the user name for the RADIUS SNMP accounting.
9039040-00 Rev AB