View Global LLDP Information

About this task

Use this procedure to view global LLDP information, to know which LLDP settings and parameters are configured.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. Display LLDP local system data:

    show lldp local-sys-data [med]

  3. Display the LLDP neighbor system information:

    show lldp neighbor [summary] [port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}]

  4. Display the list of ports:

    show lldp port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}]

  5. Display the LLDP reception statistics:

    show lldp rx-stats [port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}]

  6. Display the LLDP statistics:

    show lldp stats

  7. Display the LLDP transmission statistics:

    show lldp tx-stats [port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}]

Examples

View global LLDP information:

Switch:1#show lldp
802.1ab Configuration:
------------------------------------
             TxInterval: 30
       TxHoldMultiplier: 4
            ReinitDelay: 1
                TxDelay: 1
   NotificationInterval: 5

View the LLDP local system data on the switch:

Switch:1#show lldp local-sys-data

======================================================================
                             LLDP Local System Data

======================================================================

               ChassisId: MAC Address        b0:ad:aa:4c:54:00
               SysName  : LLDP agent
               SysDescr : 5320-24P-8XE-FabricEngine (9.0.0.0)
               SysCap   : Br / Br
----------------------------------------------------------------------
Capabilities Legend: (Supported/Enabled)
B= Bridge,    D= DOCSIS,    O= Other,     R= Repeater,
S= Station,   T= Telephone, W= WLAN,      r= Router

View the LLDP neighbor information. You can also view this information for a specific port.

Switch:1#show lldp neighbor

===============================================================================
                                      LLDP Neighbor
===============================================================================

Port: 1/28      Index    : 1                  Time: 0 day(s), 01:16:25
                Protocol : LLDP
                ChassisId: MAC Address        a4:25:1b:52:54:00
                PortId   : MAC Address        a4:25:1b:52:54:1b
                SysName  : BEB
                SysCap   : Br / Br
                PortDescr: Extreme Networks 7520-48XT-6C-FabricEngine - 10GBaseT Port 1/13
                SysDescr : 7520-48XT-6C-FabricEngine (9.0.0.0) 
                Address  : 192.0.2.47
-------------------------------------------------------------------------------

Total Neighbors : 1

-------------------------------------------------------------------------------
Capabilities Legend: (Supported/Enabled)
B= Bridge,    D= DOCSIS,    O= Other,     R= Repeater,
S= Station,   T= Telephone, W= WLAN,      r= Router
Note

Note

For information on the Mgmt-sdwan interface, see Fabric Extend (FE) States.
Switch:1#show lldp neighbor 
==========================================================================================
                                      LLDP Neighbor
==========================================================================================
Port: 1/20      Index    : 3    
                Protocol : LLDP
                ChassisId: MAC Address        00:07:32:a6:8e:d4
                PortId   : MAC Address        00:07:32:a6:8e:d4
                SysName  : SDWAN-4
                SysCap   : BWrS / Br          
                PortDescr: lan1
                SysDescr : ExtremeCloud SDWAN S/N:A1122W1412A0
                Address  : 172.16.0.1
           IPv6 Address  : 0:0:0:0:0:0:0:0
------------------------------------------------------------------------------------------
Total Neighbors : 1
------------------------------------------------------------------------------------------

View the LLDP neighbor summary of all ports on the switch. You can also view this on a specific port.

Note

Note

The EDM tab (Edit > Diagnostics > 802_1ab > LLDP > Neighbor > ) displays only IPv4 addresses. Use CLI to see both IPv4 and IPv6.

Switch:1#show lldp neighbor summary 
========================================================================================================================
                                                           LLDP Neighbor Summary
========================================================================================================================
LOCAL            IP/IPv6         CHASSIS            REMOTE
PORT       PROT  ADDR            ID                 PORT   SYSNAME                  SYSDESCR
------------------------------------------------------------------------------------------------------------------------
1/1        LLDP  192.168.1.1     bc:ad:ab:00:1c:00  1/23   Mgmt_L10_10.3.44.248     Ethernet Routing Switch 59100GTS
1/2        LLDP  169.254.252.4   f4:ce:48:9e:fc:00  1/2    5320-24T-8XE-FabricEngi~ 5320-24T-8XE-FabricEngine (9.0.2.0)
1/3        LLDP  169.254.252.4   f4:ce:48:9e:fc:00  1/3    5320-24T-8XE-FabricEngi~ 5320-24T-8XE-FabricEngine (9.0.2.0)
1/4        LLDP  169.254.252.4   f4:ce:48:9e:fc:00  1/4    5320-24T-8XE-FabricEngi~ 5320-24T-8XE-FabricEngine (9.0.2.0)
1/5        LLDP  169.254.252.4   f4:ce:48:9e:fc:00  1/5    5320-24T-8XE-FabricEngi~ 5320-24T-8XE-FabricEngine (9.0.2.0)
1/6        LLDP  169.254.252.4   f4:ce:48:9e:fc:00  1/6    5320-24T-8XE-FabricEngi~ 5320-24T-8XE-FabricEngine (9.0.2.0)
1/7        LLDP  169.254.252.4   f4:ce:48:9e:fc:00  1/7    5320-24T-8XE-FabricEngi~ 5320-24T-8XE-FabricEngine (9.0.2.0)
1/8        LLDP  169.254.252.4   f4:ce:48:9e:fc:00  1/8    5320-24T-8XE-FabricEngi~ 5320-24T-8XE-FabricEngine (9.0.2.0)
------------------------------------------------------------------------------------------------------------------------
Total Neighbors : 8

View the LLDP administrative status of all ports on the switch. You can also view this on a specific port.

Switch:1#show lldp port

======================================================================
                             LLDP Admin Port Status

======================================================================
----------------------------------------------------------------------
Port       AdminStatus  ConfigNotificationEnable  CdpAdminState
----------------------------------------------------------------------
1/1        txAndRx      disabled                  disabled
1/2        txAndRx      disabled                  disabled
1/3        txAndRx      disabled                  disabled
1/4        txAndRx      disabled                  disabled
...
...

View the LLDP reception statistics. You can also view this on a specific port.

Switch:1#show lldp rx-stats

=============================================================================
                                 LLDP Rx-Stats

=============================================================================

Port      Frames      Frames   Frames   TLVs        TLVs           AgeOuts
Num       Discarded   Errors   Total    Discarded   Unsupported
                                        (Non FA)    (Non FA)
-----------------------------------------------------------------------------
1/1       0           0        0        0           0              0
1/2       0           0        0        0           0              0
1/3       0           0        0        0           0              0
1/4       0           0        0        0           0              0
...
...

View the LLDP statistics:

Switch:1#show lldp stats

==============================================================
                                   LLDP Stats

==============================================================
Inserts    Deletes    Drops      Ageouts
--------------------------------------------------------------
4          0          0          0
--------------------------------------------------------------

View the LLDP transmission statistics:

Switch:1#show lldp tx-stats

======================================================================
                                 LLDP Tx-Stats

======================================================================

PORT NUM                 FRAMES
----------------------------------------------------------------------
1/1                      95
1/2                      95
1/3                      95
1/4                      95
1/5                      95
...
...

Display LLDP-MED local system data:

Switch:1#show lldp local-sys-data med
==========================================================================================
                             LLDP Local System Data
==========================================================================================

               ChassisId: MAC Address        f4:ce:48:9f:50:00
               SysName  : 5320-24P-8XE-FabricEngine
               SysDescr : 5320-24P-8XE-FabricEngine (9.0.0.0)
               SysCap   : Br / Br

        MED Capabilities:       CNLSI
        MED Device Type:        Network Connectivity Device
        MED Power Device Type:  PSE Device
        HWRev: 02               FWRev: -
        SWRev: 9.0.0.0          SerialNumber: TB012132K-H0057
        ManufName: Extreme Networks. ModelName: 5320-24P-8XE-FabricEngine
        Asset ID: TB012132K-H0057
-----------------------------------------------------------------------------------------

Capabilities Legend: (Supported/Enabled)
B= Bridge,    D= DOCSIS,    O= Other,     R= Repeater,
S= Station,   T= Telephone, W= WLAN,      r= Router
----------------------------------------------------------------------------
MED Capabilities Legend: (Supported/Enabled)
  C= Capabilities, N= Network Policy; L= Location Identification; 
  I= Inventory; S= Extended Power via MDI - PSE; D= Extended Power via MDI - PD.

Variable Definitions

The following table defines parameters for the show lldp command.

Variable

Value

local-sys-data

Displays the LLDP local system data.

neighbor [summary] [port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}]

Displays the LLDP neighbor system information. You can also view this on a specific port.

Identifies the slot and port in one of the following formats:
  • a single slot and port (slot/port)

  • a range of slots and ports (slot/port-slot/port)

  • a series of slots and ports (slot/port,slot/port,slot/port)

  • all ports on the same slot (slot/all)

  • all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

port [{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}]

Displays the LLDP administrative status of a port or all ports on the switch.

Identifies the slot and port in one of the following formats:
  • a single slot and port (slot/port)

  • a range of slots and ports (slot/port-slot/port)

  • a series of slots and ports (slot/port,slot/port,slot/port)

  • all ports on the same slot (slot/all)

  • all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

rx-stats [port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}]

Displays the LLDP reception statistics on all ports on the switch, or on a specific port.

Identifies the slot and port in one of the following formats:
  • a single slot and port (slot/port)

  • a range of slots and ports (slot/port-slot/port)

  • a series of slots and ports (slot/port,slot/port,slot/port)

  • all ports on the same slot (slot/all)

  • all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

stats

Displays the LLDP statistics.

tx-stats [port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}]

Displays the LLDP transmission statistics on all ports on the switch or on a specific port.

Identifies the slot and port in one of the following formats:
  • a single slot and port (slot/port)

  • a range of slots and ports (slot/port-slot/port)

  • a series of slots and ports (slot/port,slot/port,slot/port)

  • all ports on the same slot (slot/all)

  • all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.