Clear VLACP Flap Detect and Damping Statistics for a Port

Perform the following procedure to clear the VLACP Flap Detect and Damping statistics for a specific VLACP port or all VLACP ports on the switch.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. Clear VLACP Flap Detect and Damping statistics:

    clear vlacp flap-stats port [{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}]

Example

Switch:1>enable
Switch:1#clear vlacp flap-stats port 2/1

Variable Definitions

Use data in the following table to use the clear vlacp flap-stats command.

Variable

Value

port{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Identifies a single slot and port. If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.