Appliances

You can access the Appliances page by clicking in the left main menu of ExtremeCloud SD-WAN or in the Appliances widget on the Dashboard.

Overview

The Overview dashboard displays the appliances of your network with the following column information:

• Appliances: name of the appliance
• Site: associated site
• Status: connected or disconnected in the network
• Fabric LLDP Signaling: LLDP including Fabric Extend TLVs is received or not (due to missing configuration, LLDP exception, etc.). Only appears if Fabric Support is enabled.
• Configuration Status
• Serial Number
• Firmware: build number
• Management IP: Management IP address
• Template: associated template
• Last update: date when the appliance was updated
• Action: enables you to delete the appliance

Note that you can sort appliances by clicking each column header. Also use:

• to auto-size the current column or all columns. Pinning the selected column displays it in a separate part of the table
• to search, add or remove parameter columns

Appliance Details

In the Overview table, click the Appliance Name.

• The left pane of the window is a summary of the appliance configuration and policy. You can edit both of them. Refer to "Configuring Appliances", "Creating Appliance Templates", "Configuring the Network Policy"
• The Fabric Support summary contains Fabric Switch information and status as well as Peering information. It also enables you to display the corresponding Fabric Engine page in ExtremeCloud IQ Site Engine.
• Click the Peers link to display The Peering Status table.

This table enables you to monitor the state of Vxlan tunnels (Fabric Extend tunnels) thanks to the Remote SD-WAN Appliance name, GRE/IPSEC aggregated state, Fabric Switch name and IS-IS adjacency state without using any other tool such as ExtremeCloud IQ Site Engine.

• Click the XIQSE link under Managed by -> Application to display the appropriate Device page of ExtremeCloud IQ Site Engine. Refer to the Devices section of the ExtremeCloud IQ Site Engine User Guide.
• The Appliance Connections are shown on the map with the number of existing alarms. Click the Alarms widget to view alarm details. Refer to "Alarms Management"
• Click the Summary button to display the connection details, i.e. the overlays with their status (up or down), their destination site and destination appliance/interface. You can download this information as a Connectionlist_Data.csv file.
• Refer to the following sections for a complete description of the functions:
• Run Scripts
• Upgrade
• Advanced Troubleshooting

In the Overview table, click the Site Name associated with each appliance. Refer to "Sites".