IP Address allocation
The following diagrams display SD-WAN Orchestrator manual LAN side IP address allocation with an appliance in full router, hybrid and bridge modes. All three WAN interfaces of the appliance are enabled.
You must configure these IP addresses in the SD-WAN Orchestrator.
| • | Light blue arrows represent iBGP automatic connections |
| • | Dark blue arrows represent iBGP connections you must configure in the SD-WAN Orchestrator |
| • | Green arrows represent the connections you must configure on the Core Router (the SD-WAN Orchestrator is not used) |
Warning: iBGP configuration is done with the internal LAN interfaces of the embedded RT routers of the appliance.
Full Router Mode
|
|
|
Hybrid Mode
|
|
|
Bridge Mode
|
|
|
Graph legend
|
|
|
Mgt |
RT1/RT2/RT3 |
|
SD-WAN appliance |
router |
Management IP address |
Router 1/Router 2/Router 3 IP address |
Note: A router may be a CE Router (MPLS router), an Internet Access Router or a Core Router.