Configuring Alarm Notification
At any time, to be informed of the Critical, Major and Minor alarms that have been raised or cleared by ExtremeCloud SD-WAN without displaying the Active Alarms dashboard, you may configure alarm notification through the Notification Rules function.
Note: This function is only available to the Administrator and Network Manager profiles.
Set an Alarm Notification Rule
|
1
|
Click the  button at the top of the Alarms page. |
|
2
|
Click  |
|
3
|
Enter the Name of the Notification Rule. |
|
4
|
From the Category stack of values, select one or several options: |
|
•
|
Underlay: physical connection between devices (LAN, WAN), VRRP state change, appliance configuration |
|
•
|
Overlay: connection between appliances or external gateways through IPsec tunnels |
|
•
|
Services: services provided with the appliances such as application visibility, application control, WAN optimization, dynamic WAN selection, firewall |
|
•
|
EQS: site EQS for applications and site connectivity |
|
•
|
Resources: device local resources, i.e. hardware monitoring |
|
•
|
Management: connection to components (Orchestrator, etc.) |
|
•
|
All: all the categories are taken into account |
|
5
|
From the Site stack of values, select one or several sites in your network. You'll be notified of alarms related to these sites only. |
|
6
|
From the Severity stack of values, define the type of alarm (minor, major and critical) which must trigger the notification messages. |
|
7
|
Enter the email address of one or several Recipients. All the recipients will be notified of this alarm by email. |
The new Notification Rule appears in the Notification Rule Details table with its parameters.
|
•
|
You can deactivate the Notification Rule by modifying the State option. |
|
•
|
Click  to download the table of Notification Rules as an Alarm_Notification_Data.csv file. |
|
•
|
Click  to delete any Notification Rule. |