Configuring DWS Policy
You can configure DWS Policy through the following parameters:
|
•
|
Primary Network: check the favorite WAN Service(s) for this Application Group. |
|
•
|
Secondary Network: check the second favorite WAN Service(s) for this Application Group. |
|
•
|
Performance Based (default): the Secondary Network can be selected instead of the Primary one (if the Primary Network is broken), or if the quality of this Application Group is better on the Secondary Network than on the Primary Network. |
|
•
|
Backup: the Secondary Network can be selected instead of the Primary Network if this one is broken, and only in that case. |
|
•
|
Tertiary Network: check the last acceptable WAN Services for this Application Group. If several WAN Services are selected, then load balancing will be applied between them. |
|
•
|
Performance based (default): the Tertiary Network can be selected instead of the Secondary Network if it is broken, or if the quality of this Application Group is better on the Tertiary Network than on the Secondary Network. |
|
•
|
Backup: the Tertiary Network can be selected instead of the Secondary Network if this one is broken, and only in that case. |
|
•
|
The first two parameters, Return path and Granularity are dedicated to Advanced Users. Always call Extreme Networks Support. |
|
•
|
Default Action: if no decision is made, traffic is either sent on “NAP 0” (forward) or dropped. |