Configuring Alarm Notification

At any time, to be informed of the Critical, Major and Minor alarms that have been raised or cleared by ExtremeCloud SD-WAN without displaying the Active Alarms dashboard, you may configure alarm notification through the Notification Rules function.

Note: This function is only available to the Administrator and Network Manager profiles.

Set an Alarm Notification Rule

1 Click the button at the top of the Alarms page.
2 Click
3 Enter the name of the notification rule.
4 From the Category stack of values, select one or several options:
• Underlay: physical connection between devices (LAN, WAN), VRRP state change, appliance configuration
• Overlay: connection between appliances or external gateways through IPsec tunnels
• Services: services provided with the appliances such as application visibility, application control, WAN optimization, dynamic WAN selection, firewall
• EQS: site EQS for applications and site connectivity
• Resources: device local resources, i.e. hardware monitoring
• Management: connection to components (Orchestrator, etc.)
• All: all the categories are taken into account
5 From the Site stack of values, select one or several sites in your network. You'll be notified of alarms related to these sites only.
6 From the Severity stack of values, define the type of alarm (minor, major and critical) which must trigger the notification messages.
7 Enter the email address of one or more recipients. All the recipients are notified of the alarm by email.
8 Select Create.

The new notification rule appears in the Notification Rule Details table with its parameters.

• You can deactivate the notification rule by modifying the State option.
• Click to download the table of notification rules as an Alarm_Notification_Data.csv file.
• Click to delete any notification rule.