Creating Sites and Appliances

From the interface main menu, select Onboard.

Create Sites

1

Click Add Site.

2

Enter the Site Name, Street Address, City, State/Province, Country and Postal Code. Click Save Site.

The Site is displayed on the map and the system asks you to confirm this new site. Click Save Site.

3

Click Add Site and create a second Site. Click Save Site twice.

4

Click Next to provision some appliances.

Provision Appliances

Appliance identification (for all the appliances except ipe-2200ax-T and ipe-2200ax-F)

You can precisely identify the type of any SD-WAN appliance in your network through its Serial Number.

The Serial Number is made of 12 characters and is indicated on the appliance chassis.

Appliance identification (only for ipe-2200ax-T and ipe-2200ax-F)

The Serial Number is made of 15 characters and is indicated on the appliance chassis.

Procedure

1

Click Add Appliance.

2

Enter the Serial Number of one of your appliances.

3

Assign the appliance to one Site by selecting it from the list.

4

Select from the list the appropriate Template. The listed templates are those you created previously (see "Creating Appliance Templates"). Click Save.

5

Repeat the procedure for a second appliance.

Note: instead of entering appliance identification data manually, you can also provision all your appliances through the Import CSV file function.

6

Click Next - Review Configuration. The different models of provisioned appliances are displayed with their serial numbers.

7

Click Next - Deploy Configuration or from the main menu, select Appliances to further configure your appliances.