Configures an ESRP domain to track a route entry in the system‘s routing table.
| esrpDomain | Specifies an ESRP domain name. |
| ipaddress | Specifies the IPv4 address of the route entry to be tracked. |
| masklength | Specifies the subnet of the route entry to be tracked. |
Disabled.
The track-ip metric consists of the total number of tracked IPv4 routes that are up or functional.
An ESRP domain can track eight IPv4 routes.
Note
ESRP route tracking is not supported on IPv6 networks.
The following command enables IPv4 route failure tracking for routes to the specified subnet:
configure esrp esrp1 add track-iproute 192.168.46.0/24
This command was first available in ExtremeXOS 11.0.
This command is available on all Universal switches supported in this document.