Displays global OSPFv3 information.
This command has no arguments or variables.
N/A.
None.
The following command displays global OSPFv3 information:
show ospfv3
The following is sample output:
OSPFv3 : Disabled RouterId : 0.0.0.0 RouterId Selection : Automatic ASBR : No ABR : No ExtLSAs : 0 ExtLSAChecksum : 0x0 OriginateNewLSAs : 0 ReceivedNewLSAs : 0 SpfHoldTime : 3s Num of Areas : 1 LSA Batch Interval : 0s 10M Cost : 100 100M Cost : 50 1000M Cost (1G) : 40 2500M Cost (2.5G) : 40 5000M Cost (5G) : 40 10000M Cost (10G) : 20 25000M Cost (25G) : 20 40000M Cost (40G) : 20 50000M Cost (50G) : 20 100000M Cost (100G) : 10 Graceful Restart : None Grace Period : 120s Import Policy File : none SNMP Traps : Disabled Redistribute: Protocol Status Cost Type Tag Policy direct Disabled 20 2 --- none e-bgp Disabled 20 2 --- none i-bgp Disabled 20 2 --- none ripng Disabled 20 2 --- none static Disabled 20 2 --- none isis-level-1 Disabled 20 2 --- none isis-level-2 Disabled 20 2 --- none isis-level-1-external Disabled 20 2 --- none isis-level-2-external Disabled 20 2 --- none host-mobility Disabled 20 2 --- none
This command was first available in ExtremeXOS 11.2.
The 40G parameter was added in ExtremeXOS 12.6.
SNMP trap status information was added in ExtremeXOS 22.1.
This command is available on platforms with Base license, or higher, as described in the Switch Engine v33.1.1 Licensing Guide document.