Configures a global inter-area filter policy.
| area-identifier | Specifies the OSPF target area. |
| policy-map | Specifies a policy. |
| none | Specifies not to apply an interarea filter. |
N/A.
For switches configured to support multiple OSPF areas (an ABR function), a policy can be applied to an OSPF area that filters a set of OSPF inter-area routes from being sourced from any other areas.
The following command configures an inter-area filter policy, nosales:
configure ospf area 0.0.0.6 interarea-filter nosales
This command was first available in ExtremeXOS 10.1.
This command is available on platforms with Base license, or higher, as described in the Switch Engine v33.1.1 Licensing Guide document.