Configures the parameters associated with a local VM database entry to be used for VM MAC local authentication.
| mac | Specifies the MAC address for the VM database entry you want to configure. |
| name | Specifies a name to represent this VM in show vm-tracking command display. |
| ipaddress | Specifies the IP address for the VM. This must match the IP address configured on the VM. |
| vpp_name | Specifies the name of a VPP to apply to the local VM. |
| tag | VLAN tag between 1 and 4094. |
| vr_name | Virtual router name. |
N/A.
Before you configure a VM entry in the local VM database, you must create the entry with the create vm-tracking local-vm command.
Before you assign an VPP to a VM entry in the local VM database, you must create the VPP with the create vm-tracking vpp command.
The following command configures an IP address for the VM entry specified by the MAC address:
# configure vm-tracking local-vm mac-address 00:E0:2B:12:34:56 ip-address 10.10.10.1
This command was first available in ExtremeXOS 12.5.
The ingress-vpp and egress-vpp options were replaced with the vpp option in ExtremeXOS 12.6.
The vlan-tag and vr-name options were added in ExtremeXOS15.3.
This command is available on all Universal switches supported in this document.