show ip vrrp interface

Display Virtual Router Redundancy Protocol (VRRP) information about the interface.

Syntax

show ip vrrp interface [verbose] [version <2-3>] [vlan <1-4059>] [vrf WORD<1-16>] [vrfids WORD<0-512>] [vrid <1-255>]

version <2|3>: Displays the VRRP version configured.
verbose: Shows all available information about the VRRP interfaces.
vlan <1-4059>: Shows the VRRP interface gigabitEthernet configurations.
Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.
vrf WORD<1-16>: Shows all available information about the VRRP interfaces.
vrfids WORD<0-512>: Specifies the ID of the VRF.

None

User EXEC