show interfaces gigabitethernet vrfs

Syntax

• show interfaces gigabitEthernet vrfs

• show interfaces gigabitEthernet vrfs {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

• show interfaces gigabitEthernet vrfs vrf WORD<1-16>

• show interfaces gigabitEthernet vrfs vrfids WORD<0-512>

Command Parameters

{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Identifies the slot and port in one of the following formats:

• a single slot and port (slot/port)

• a range of slots and ports (slot/port-slot/port)

• a series of slots and ports (slot/port,slot/port,slot/port)

• all ports on the same slot (slot/all)

• all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

vrf WORD<1-16>

Specifies a VRF instance by name.

vrfids WORD<0-512>

Specifies a range of VRFs by ID number.

Default

None

Command Mode

Privileged EXEC