isis multi-area ip redistribute unicast

Enables IS-IS Multi-area SPB IPv4 unicast redistribution for the specific Virtual Router Forwarding (VRF) instance on the switch.

Syntax

default isis multi-area ip redistribute unicast [enable] [home-to-remote] [remote-to-home] [route-map]
isis multi-area ip redistribute unicast [delete-tags] [enable] [home-to-remote] [remote-to-home] [route-map WORD<1-64>]
no isis multi-area ip redistribute unicast [delete-tags] [enable] [home-to-remote] [remote-to-home] [route-map>]

delete-tags: Disables the transmission of route tags in Multi-area SPB. Use this parameter if platforms do not correctly calculate the TLV length in TLV 135. By default, route tags are transported in Multi-area SPB.
enable: Enables the IS-IS Multi-area SPB IPv4 unicast redistribution.
home-to-remote: Specifies the redistribution configuration for home to remote direction.
remote-to-home: Specifies the redistribution configuration for remote to home direction.
route-map: Specifies the Multi-area SPB IPv4 redistribution route policy.

The default is disabled.

VRF Router Configuration

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine and VOSS Feature Matrix.