Displays the Auto-sense configuration related to voice for IP phones.
show auto-sense voice
None.
User EXEC
The show auto-sense voice command displays the following information:
|
Output field |
Description |
|---|---|
|
TYPE |
Displays the type of voice device. |
|
LDDP-AUTH ENABLE |
Displays if Link Layer Discovery Protocol (LLDP) authentication is enabled for IP phones. |
| I-SID | Displays the voice I-SID. |
| C-VID | Displays the customer VLAN ID for IP phones. |
| DSCP | Displays the DSCP value for the voice VLAN. |
| PRIORITY | Displays the priority value for the voice VLAN. |
The following example displays the Auto-sense configuration related to voice:
Switch:1>show auto-sense voice
===============================================================================
AUTO-SENSE VOICE Config
===============================================================================
TYPE LDDP-AUTH ENABLE I-SID C-VID DSCP PRIORITY
-------------------------------------------------------------------------------
phone FALSE 2000 2000 46 6
-------------------------------------------------------------------------------
1 out of 1 Total Num of AUTO-SENSE entries displayed
-------------------------------------------------------------------------------