Display global Bidirectional Forwarding Detection (BFD) configuration information for IPv6 interfaces.
show ipv6 bfd
show ipv6 bfd vrf
show ipv6 bfd vrfids
Specifies a VRF instance by VRF name.
Specifies a VRF or range of VRFs by ID.
User EXEC
BFD for IPv6 interfaces is a demonstration feature on some products. For more information about feature support, see Fabric Engine and VOSS Feature Matrix.
The show ipv6 bfd command displays the following information:
|
Output field |
Description |
|---|---|
|
BFD Version |
Specifies the current BFD version. |
|
Admin Status |
Specifies whether BFD is enabled globally. |
|
Trap Enable |
Specifies whether traps are enabled. |
|
Total session number |
Specifies the total number of BFD sessions. |
|
UP |
Specifies whether a BFD session is in UP state. |
|
DOWN |
Specifies whether a BFD session is in DOWN state. |
|
AdminDown |
Specifies whether a BFD session is in AdminDown state. |
|
Init |
Specifies whether a BFD session is in Init state. |
The following example displays global configuration information for BFD on an IPv6 interface.
Switch:1>show ipv6 bfd
================================================================================
BFD information - GlobalRouter
================================================================================
BFD Version : 1
Admin Status : TRUE
Trap Enable : FALSE
--------------------------------------------------------------------------------
Total session number : 1
UP: 0, DOWN: 1, AdminDown: 0, Init: 0
--------------------------------------------------------------------------------