set logical-intf-tunnel <1-255>

Syntax

• set logical-intf-tunnel <1-255> fe-tunnel-dest-ip {A.B.C.D}

• set logical-intf-tunnel <1-255> mtu <750-9000>

• set logical-intf-tunnel <1-255> tunnel-name WORD <1-64>

• set logical-intf-tunnel <1-255> egress-shaping-rate <1-1000>

Command Parameters

fe-tunnel-dest-ip {A.B.C.D}

Specifies the Fabric Extend (FE) tunnel destination IP address for the logical interface.

mtu <750-9000>

Specifies the Maximum Transmission Unit (MTU) value for the FE tunnel with only fragmentation and assembly capabilities.

tunnel-name WORD <1-64>

Specifies the name of the logical interface tunnel.

egress-shaping-rate<1-1000>

Specifies the egress shaper rate for the logical interface tunnel.

Default

None.

Command Mode

Fabric IPsec Gateway Configuration

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine and VOSS Feature Matrix.