Display Intermediate-System-to-Intermediate-System (IS-IS) statistics.
show isis statistics
None
User EXEC
The show isis statistics command displays the following information:
|
Parameter |
Description |
|---|---|
|
LEVEL |
Shows the level of the IS-IS interface. |
|
CORR LSPs |
Shows the number of corrupted LSPs detected. |
|
AUTH FAILS |
Shows the number of times authentication has failed on the global level. |
|
AREA DROP |
Shows the number of manual addresses dropped from the area. |
|
MAX SEQ EXCEEDED |
Shows the number of attempts to exceed the maximum sequence number. |
|
SEQ NUM SKIPS |
Shows the number of times the sequence number was skipped. |
|
OWN LSP PURGE |
Shows how many times the local LSP was purged. |
|
BAD ID LEN |
Shows the number of ID field length mismatches. |
|
PART CHANGES |
Shows the number of partition link changes. |
|
LSP DB OLOAD |
Show the number of times the switch was in the overload state. |
|
AREA |
Indicates the type of area as home or remote. |
|
AREA-NAME |
Indicates the name of the area. |
Switch:1>show isis statistics
======================================================================================================
ISIS System Stats
======================================================================================================
LEVEL CORR AUTH AREA MAX SEQ SEQ NUM OWN LSP BAD ID PART LSP DB AREA AREA-NAME
LSPs FAILS DROP EXCEEDED SKIPS PURGE LEN CHANGES OLOAD
------------------------------------------------------------------------------------------------------
Level-1 0 0 0 0 1 0 0 0 0 HOME area-9.00.02
Level-1 0 0 0 0 1 0 0 0 0 REMOTE area-9.00.02