ip anycast-gateway {A.B.C.D}

Syntax

• ip anycast-gateway {A.B.C.D} [vrid <1-255>]

• no ip anycast-gateway gw-ipv4

Command Parameters

{A.B.C.D}

Specifies the gateway IPv4 address. The gateway IP must be in different subnets for different interfaces, and must be the same on different routers for the same associated Layer 2 VSNs.

gw-ipv4

Removes the gateway IP from the interface.

vrid <1-255>

Specifies the virtual router ID, which defines the gateway MAC as a VRRP MAC. The gateway MAC must be the same on different routers for the same associated Layer 2 VSN.

If you do not specify the VRID as part of the command, the default value is VRID 39 (hexadecimal 27), which translates to the MAC of 00:00:5e:00:01:27.

Default

None

Command Mode

VLAN Interface Configuration