show ip ipvpn

Display the configuration for IP VPN enabled VRFs.

Syntax

show ip ipvpn [vrf WORD<1-16>] [vrfids WORD<0-512>]

Command Parameters

vrf WORD<1-16>: Specifies a VRF.
vrfids WORD<0-512>: Specifies the VRF ID.

Default

None

Command Mode

User EXEC

Example

The following example displays the command output.

Switch:1>show ip ipvpn 
==========================================================================================
                                        IPv4 IPVPN
==========================================================================================
VRF Name            VRF ID   IPv4 IPVPN   IPv6 IPVPN   I-SID        I-SID Name
------------------------------------------------------------------------------------------
green               1        enabled      disabled     109          ExtremeServer1
------------------------------------------------------------------------------------------
1 out of 1 Total IPv4 L3 VSN, 1 active IPv4 and 0 active IPv6 displayed.