show isis multi-area ip redistribute unicast

Displays the IS-IS Multi-area SPB IPv4 unicast redistribution configuration on the switch.

Syntax

Command Parameters

home-to-remote
Specifies the home to remote redistribution.
remote-to-home
Specifies the remote to home redistribution.
vrf WORD<1-16>
Specifies the Virtual Router Forwarding (VRF) name.
vrfids WORD<0-512>
Specifies a range of VRF IDs as text from range 0 to 512 characters in length.

Default

The default is none.

Command Mode

User EXEC

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine and VOSS Feature Matrix.

Command Output

The show isis multi-area ip redistribute unicast command displays the following information:

Parameter

Description

DIRECTION

Indicates the direction of the redistribution policy.

ENABLE

Indicates if the redistribution policy is enabled on the switch.

RPOLICY

Indicates the route policy for IS-IS Multi-area SPB IPv4 unicast redistribution.

Example

Displaying the IS-IS Multi-area SPB IPv4 unicast redistribution on the switch:

Switch:1>show isis multi-area ip redistribute unicast

===================================================================================
         ISIS Multiarea Redistribute List for ip unicast - GlobalRouter
===================================================================================
DIRECTION            ENABLE     RPOLICY
-----------------------------------------------------------------------------------
home-to-remote       TRUE
remote-to-home       TRUE
9039033-00 Rev AA