show lldp tx-tlv port

Display Link Layer Discovery Protocol (LLDP) transmission TLVs for transmission on a specific port.

Syntax

show lldp tx-tlv port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Command Parameters

port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Identifies the slot and port in one of the following formats:

a single slot and port (slot/port)
a range of slots and ports (slot/port-slot/port)
a series of slots and ports (slot/port,slot/port,slot/port)
all ports on the same slot (slot/all)
all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

Privileged EXEC

Command Output

The show lldp tx-tlv port command displays the following information:


Output field	Description
Port	Specifies the port number.
PortDesc	Specifies the port description transmission TLV.
SysName	Specifies the system capabilities transmission TLV.
SysDesc	Specifies the system description transmission TLV.
SysCap	Specifies the system name transmission TLV.

Switch:1>show lldp tx-tlv port 1/2
=======================================================
                     LLDP port tlvs
=======================================================
-------------------------------------------------------
Port       PortDesc   SysName   SysDesc   SysCap    LocalMgmtAddr
-------------------------------------------------------
1/2        enabled    enabled   enabled   enabled   enabled