Displays DHCP Server information.
show ip dhcp-server
User EXEC
The show ip dhcp-server command displays the following information:
|
Field |
Description |
|---|---|
|
Status |
Specifies whether DHCP Server is enabled or disabled. |
|
Mgmt-clip status |
Specifies whether a management CLIP IP interface is enabled. |
|
Mgmt-clip ip |
Displays the IP address of the management CLIP IP interface. |
|
Mgmt VRF |
Displays the management VRF (for example, Global Router). |
|
HA peer |
Displays the IP address of the peer switch in a High Availability pair. |
|
Administrative HA role |
Displays the HA role that the admin has configured for this switch in an HA pair. The values are primary, standby, or default. If an administrator did not apply a setting, the value is default. |
|
Operational HA role |
Displays the role that the switch plays in an HA pair. The possible values are primary or standby and are derived as follows:
|
|
HA Status |
Displays the status of the HA sync between the two switches. |
|
Lease-time |
Displays the lease timer that is configured for DHCP Server globally. The default value is 86400. |
|
Authoritative |
Displays whether Authoritative mode is enabled or disabled. |
|
Netbios-name-server |
Displays the IP address of the NetBIOS name server that is assigned to DHCP Server globally. |
|
Netbios-type |
Displays the global node type of the NetBIOS server that is assigned to DHCP Server. The values are:
|
|
TFTP Server IP |
Displays the IP address of the TFTP server that is assigned to DHCP Server globally. |
|
TFTP Server Name |
Displays the server name of the TFTP server that is assigned to DHCP Server globally. |
|
TFTP bootfile-Name |
Displays the filename of the TFTP boot image that is assigned to DHCP Server globally. |
|
Domain Name |
Displays the domain name that is assigned to DHCP Server globally. |
|
DNS Server |
Displays the IP address of the DNS server(s) assigned to DHCP Server globally. |
|
NTP Server |
Displays the IP address of the NTP server(s) assigned to DHCP Server globally. |
The following example shows output for the show ip dhcp-server command.
Switch:1#show ip dhcp-server
================================================================================
DHCP Server Settings
================================================================================
Status : enabled
Mgmt-clip status : enabled
Mgmt-clip IP : 203.0.113.240
Mgmt VRF : GlobalRouter
HA peer : 0.0.0.0
Administrative HA role : default
Operational HA role : standby
HA Status : Initialising
Lease-time : 5550
Authoritative : disabled
Netbios-name-server : 0.0.0.0
Netbios-type : 0x0
TFTP Server IP : 203.0.113.50
TFTP Server Name : central
TFTP bootfile-name :
Domain Name :
NTP Server 1 : 203.0.113.60
NTP Server 2 : 203.0.113.61
NTP Server 3 : 203.0.113.62
--------------------------------------------------------------------------------