This release incorporates all fixes from prior releases, up to and including the following releases:
|
Issue number |
Description |
|---|---|
| CFD-10657 | VSP 8200 Series logging error message extended heartbeat timeout replies reached for process ssio. |
| CFD-11046 | Flooding on DvR VLANs due to ARP
anomalies. SLPP packets with DVR source MAC address will be sent on DVR Leaf UNI ports for each configured VLAN. |
| CFD-11321 | Static default route not getting redistributed into IS-IS. |
| CFD-11360 | Unexpected reboot with backtrace: Process Name: ssio, Thread Name: bcmCNTR.0 |
| CFD-11392 | Accidental use of Layer 3 VSN I-SID as ELAN ISID caused an outage. |
| CFD-11459 | TACACS Accounting not working. |
| CFD-11589 |
VSP 7400 Series: IP source guard could not configure more than 10 ports. |
| VOSS-30296 | You cannot use SNMP to configure a RADIUS server FQDN with more than 113 characters. |
| VOSS-30851 | The Network Operating System (NOS) now handles IP route 0.0.0.0/5 correctly, which is used to summarize networks 1.x.x.x through 7.x.x.x in the Internet. |
| VOSS-31031 | Switch now correctly sends SNMP Cold Start traps when power cycled and Warm Start traps when rebooted. |
| VOSS-31644 | Multi-area switches stop routing after upgrade to 8.10.3 in a specific scenario. |