transform-set

crypto-remote-vpn-client commands

Specifies the IPSec Transform set to use with this remote VPN client. A transform set is a combination of security protocols, algorithms, and other settings applied to IPSec protected client traffic.

Supported on the following devices:

• Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
• Service Platforms: NX5500, NX7500, NX9500, NX9600
• Virtual Platforms: CX9000, VX9000

Syntax

Parameters

transform-set <IPSEC-XFORM-TAG> {<IPSEC-XFORM-TAG>}

transform-set <IPSEC-XFORM-TAG> <IPSEC-XFORM-TAG>

Associates an IPSec Transform (should be existing and configured) set with this remote VPN client. You can optionally associate more than one transform set with this remote VPN client configuration. List the transform set tags separated by a space. Note: To configure a transform-set, use the crypto > ipsec > transform-set command in the profile or device configuration mode.