server-host
Configures the URL classification server
in case it is not the adopted controller
Supported on the following devices:
- Access Points:
AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632,
AP7662, AP8163, AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Syntax
server-host [host-name <SERVER-HOST-NAME>|ip-address <SERVER-IPv4>|mint-id <SERVER-MiNT-ID>]
Parameters
server-host [host-name <SERVER-HOST-NAME>|ip-address <SERVER-IPv4>|mint-id <SERVER-MiNT-ID>]
| server-host [host-name <SERVER-HOST-NAME>|ip-address
<SERVER-IPv4>|mint-id <SERVER-MiNT-ID>] |
Use one of the following options to identify the URL
classification server:
- host-name <SERVER-HOST-NAME> – Identifies the classification server by its
hostname.
- ip-address <SERVER-IPv4> – Identifies the classification server by its IP
address.
- mint-id <SERVER-MiNT-ID> – Identifies the classification server by its MiNT
ID.
|
Examples
nx9500-6C8809(config-web-filter-policy-test)#server-host ip-address 192.168.13.13
nx9500-6C8809(config-web-filter-policy-test)#show context
web-filter-policy test
cache-max-recs 9000
cache-save-interval 1000
server-host ip-address 192.168.13.13
nx9500-6C8809(config-web-filter-policy-test)#
