Security

To define a dynamic routing configuration:

1. Select Configuration > Profiles > Network.

2. Expand the Network menu to display its submenu options.

3. Expand the Network menu and select OSPF.

4. Select the Interface Settings tab.

5. Select the Add button to define a new set of virtual interface basic settings, or Edit to update the settings of an existing virtual interface configuration.

6. Select the Security tab.

   

7. Use the Inbound IP Firewall Rules drop-down menu to select the IP access and deny rule set to apply to the OSPF dynamic route.

   Either select an existing IP firewall policy or use the default set of IP firewall rules. The firewall inspects OSPF route traffic flows and detects potential attacks on the dynamic route not visible to traditional wired firewall appliances. Select the Create icon to define a new set of IP firewall rules that can be applied to the OSPF route configuration. Selecting Edit allows for the modification of an existing IP firewall rules configuration.

8. Use the VPN Crypto Map drop-down menu to select or override the Crypto Map configuration applied to this virtual interface.

   Crypto Map entries are sets of configuration parameters for encrypting packets passing through the VPN Tunnel. If a Crypto Map configuration does not exist suiting the needs of this virtual interface, select the Create icon to define a new Crypto Map configuration or the Edit icon to modify an existing configuration.

9. Select OK to save the changes to the OSPF route security configuration. Select Reset to revert to the last saved configuration.