Neighbor |
Lists the IP address of neighbor BGP supported
peer controllers or service platforms. Each IP address displays as a link to
display BGP supported device data in greater detail. |
Remote |
Lists the AS number configured on this BGP
neighbor. An AS is a set of routers under the same administration that use IGP
and common metrics to define how to route packets within the AS. |
Local AS |
Lists the AS number (1 - 4,294,967,295) configured
on this BGP wireless controller or service platforms. |
Md5 Enabled |
A green check defines MD5 authentication enabled
on the listed BGP neighbor. A red X means disabled. MD5 is a message digest
algorithm using a cryptographic hash producing a 128-bit (16-byte) hash value,
usually expressed in text as a 32 digit hexadecimal number. MD5 has been
utilized in a wide variety of cryptographic applications, and is also commonly
used to verify data integrity. |
Link Type |
Lists the type of BGP link. Displays internal if
the link type is iBGP. Displays external if the link type is eBGP. iBGP
exchanges routing table information between routers within an autonomous
system. eBGP exchanges routing table information between hosts outside an
autonomous system. |
Status |
Displays the current Active or Inactive state of
each listed BGP neighbor device. |
Uptime |
Displays the uptime for each listed BGP
neighbor. |
Remote Router |
Lists the IP address used by the BGP remote router
resource as a network identifier. |
Hold Time |
Displays the duration, in seconds, for the hold
(delay) of packet transmissions to each listed BGP neighbor device. |
Keepalive |
Displays the duration, in seconds, for the keep
alive timer used to maintain the connection to each listed BGP neighbor
device. |
Clear Routes |
Select this option (within the table) to reset and
clear all routes received from this BGP neighbor. |