EX3500 Authentication

1. Go to Configuration > Management > EX3500 Management Policy.
   The screen lists those EX3500 management policies created thus far. Select Add to create a new EX3500 management policy, Edit to modify an existing policy or Delete to remove an obsolete policy. Existing lists can be copied or renamed as needed.
2. Select the Authentication tab.
3. Select the following HTTP server settings to authenticating a HTTP connection to an EX3500:

   Server	When selected, access the EX3500 using HTTP from any Windows PC, Linux PC or other device that uses HTTP. This setting is enabled by default.
   Port	Set the HTTP port number from 1 - 65,535. The default port is 80.
   Secure Server	Select this option to secure HTTP over a designated secure port.
   Secure Port	Use the spinner control to select a secure port from 1 - 65, 535.

4. Select the following SSH server settings to authenticate a SSH connection to an EX3500:

   Server	When selected, access the EX3500 using SSH from any Windows PC, Linux PC or other device that uses SSH. This setting is enabled by default.
   Retries for SSH	Set the maximum number of retries, from 1 - 5, for connection to the SSH server resource. The default setting is 3.
   Server Key	Set the SSH server key length from 512 - 1,024. The default length is 768.
   Time Out	Set the inactivity timeout for the SSH server resource from 1 - 120 seconds. When this setting is exceeded, the SSH server resource becomes unreachable and must be reauthenticated. The default value is 120 seconds.

5. Select OK when completed to update the EX3500 authentication configuration. Select Reset to revert the screen back to its last saved configuration.