RF Domain Overrides

1. From the RF Domain screen, either select the Add button or highlight an existing policy and select Edit.
   An existing policy can also be modified by selecting it directly from the RF Domain Browser.
2. Select the Overrides item from within the RF Domain screen.

   The Overrides screen is partitioned into two tabs, with the Override SSID screen displayed by default.

3. Select the + Add Row button to create a new Override SSID configuration.
   To remove an existing Sensor Server Configuration from the table, highlight it and select the Delete icon.
4. Use the WLAN drop-down menu to select an existing WLAN to be supplied an override SSID.
   If a WLAN configuration has not been defined, select the Create button and define at least one complete WLAN configuration. For detailed information on the steps required to create a WLAN, see Wireless LAN Policy.
5. Enter the name of the SSID to use with this WLAN.
6. Select OK to save the changes to the Override SSID configuration, or select Reset to revert to the last saved configuration.
7. Select the Override WPA2 Key tab.
   The Override WPA2 Key screen enables an administrator to override a WLAN‘s existing WPA2 PSK at the RF Domain level (not the profile level). WPA2 is a newer 802.11i standard that provides even stronger wireless security than Wi-Fi Protected Access (WPA) and WEP.
8. Select the + Add Row button to populate the screen with a row for selecting an existing WLAN to override with a new WPA2 key.

   WLAN	Use the drop-down menu to selecting an existing WLAN whose key is to be overridden at the RF Domain level. A new WLAN configuration can be defined by selecting the Create icon, or an existing WLAN configuration can be modified by selecting the Edit icon.
   WPA2 Key	Enter either an alphanumeric string of 8 to 64 ASCII characters or 64 HEX characters as the primary string both transmitting and receiving authenticators must share in this new override PSK. The alphanumeric string allows character spaces. The string is converted to a numeric value. This passphrase saves the administrator from entering the 256-bit key each time keys are generated.

9. Select OK to save the changes to the Override WPA2 Key configuration, or select Reset to revert to the last saved configuration.
10. Select the Override WEP128 Keys tab.

    The Override WEP128 Keys screen enables an administrator to override a WLAN‘s existing WEP 128 Keys at the RF Domain level (not the profile level). WEP 128 uses a 104 bit key which is concatenated with a 24-bit initialization vector (IV) to form the RC4 traffic key. WEP may be all a small-business user needs for the simple encryption of wireless data on the WLAN. However, networks that require more security are at risk from a WEP flaw. WEP is only recommended if there are client devices incapable of using higher forms of security. The existing 802.11 standard alone offers administrators no effective method to update keys.

    The screen displays existing WLANs whose WEP 128 key configuration can be overridden at the RF Domain level. Either select Add to create a new WEP 128 key configuration, or select an existing WEP 128 key and the Edit button to modify the selected key‘s existing key algorithm. The screen populates with the parameters required to override a WEP 128 configuration for the selected WLAN.

11. Define the following settings for the WEP 128 key override:

    Generate Keys	Specify a 4- to 32-character RF Domain override Pass Key and click the Generate button. The pass key can be any alphanumeric string. Wireless devices and their connected clients use the algorithm to convert an ASCII string to the same hexadecimal number. Clients without adapters need to use WEP keys manually configured as hexadecimal numbers.
    Keys 1-4	Use the Key #1-4 areas to specify key numbers. For WEP 128 (104-bit key), the keys are 26 hexadecimal characters in length. Select one of these keys for default activation by clicking its radio button. Selecting Show displays a key in exposed plain text.
    Restore Default WEP Keys	If you feel it necessary to restore the WEP algorithm back to its default settings, click the Restore Default WEP Keys button. Default WEP 128 keys are as follows: Key 1 101112131415161718191A1B1C Key 2 202122232425262728292A2B2C Key 3 303132333435363738393A3B3C Key 4 404142434445464748494A4B4C

12. Select OK to save the changes to the Override WEP 128 Key configuration, or select Reset to revert to the last saved configuration.
13. Select the Override VLAN tab.
    The Override VLAN screen lists those WLANs available for override.
14. Select Add to define a new VLAN override configuration, choose an existing WLAN and select Edit to change the override VLAN and limit, or select Delete to remove a WLAN‘s override VLAN configuration
15. Use the VLAN spinner control to change the VLANs for an existing WLAN client connection, or select the + Add Row button to add additional VLANs for WLAN client connection.
16. Use the Wireless Client Limit spinner control to set the client user limit for the VLAN.
    The maximum allowed client limit is 8192 per VLAN. VLANs can be defined from 1 - 4094. The default setting is 0.
17. Select OK to save the changes to the Override VLAN configuration, or select Reset to revert to the last saved configuration.
18. Select the Override WLAN Shutdown tab.
19. Select the + Add Row button to populate the screen with a row for selecting an existing WLAN to override the WLAN mode of operation.
20. Provide the following parameters:

    WLAN	Use the drop-down menu to select an existing WLAN whose mode of operation is to be overridden at the RF Domain level.
    Shutdown	Select to shut down the WLAN operation on all mapped radios. When selected, the RF Domains Access Points, mapped to the selected WLAN, stop beaconing the WLAN's SSID.

21. Select OK to save the changes to the Override VLAN Shutdown configuration, or select Reset to revert to the last saved configuration.