T5 Radio DSL Custom

A T5 controller uses the operating system to manage its connected radio devices, as opposed to the WiNG operating used by RFS controllers and NX service platforms. However, a T5 controller, once enabled as a supported external device, can provide data to WiNG to assist in a T5‘s management within a WiNG supported subnet populated by both types of devices. The Customer Premises Equipment (CPEs) are the T5 controller managed radio devices using the operating system. The tabs within the Radios section support these T5 managed CPE radio devices. These CPEs use a Digital Subscriber Line (DSL) as their high speed Internet access mechanism using the CPE‘s physical wallplate connection and phone jack.

To view Custom CPE DSL counter statistics:

  1. Select the Statistics menu from the Web UI.
  2. Select the Wireless Controller node from the left navigation pane and select a T5 controller from amongst those displayed.
  3. Select the DSL menu item. Select the Custom tab displays by default.
    The Custom DSL screen displays the following:
    Average Response Time List each DSL's average response time in microseconds.
    Maximum (peak) Response Time List each DSL's maximum (best to date since the screen was refreshed) response time in microseconds.
    Downstream Errored Seconds List the number of seconds downstream DSL transmissions were negatively impacted by code violations.
    Downstream Severely Errored Seconds List the number of seconds downstream DSL transmissions were severely negatively impacted by code violations.
    Upstream Errored Seconds List the number of seconds upstream DSL transmissions were negatively impacted by code violations.
    Upstream Severely Errored Seconds List the number of seconds upstream DSL transmissions were severely negatively impacted by code violations.
  4. Select Refresh to update the screen's statistics counters to their latest values.