RF Domain WLAN Override Configuration

1. Select WLAN Override.
   

   Note

   The WLAN Override option is available only for access points – not for controllers or service platforms.
   The WLAN Override screen displays with the Override SSID tab displayed by default.
2. Optionally, define up to three overrides for the listed WLAN SSID assignment:

   WLAN	Optionally use the drop-down menu to change the WLAN assignment for the listed access point. Click the Create icon to define a new WLAN configuration, or click the Edit icon to modify an existing WLAN configuration.
   SSID	Optionally change the SSID associated with the WLAN. The WLAN name is auto-generated using the SSID until it is changed (overridden). The maximum number of characters used for the SSID is 32.

3. Click + Add Row as needed to add additional WLAN SSID overrides.
   

   Note

   A blue override icon (to the left of a parameter) defines the parameter as having an override applied. To remove an override go to the Basic Configuration section of the device and click Clear Overrides. This removes all overrides from the device.
4. Click OK to save the changes and overrides.
   Click Reset to revert to the last saved configuration.
5. Select the Override VLAN tab to review existing VLAN assignment overrides or to add or edit configurations.
   The Override VLAN tab displays VLANs assigned to the access point‘s WLAN.
6. Click Add to create a new client limit for a specific WLAN and VLAN, or click Edit to modify an existing configuration.
7. Optionally define a VLAN‘s wireless client limit override configuration.

   VLANS	Set a virtual interface ID (1 - 4094).
   Wireless Client Limit	Set the number of users permitted on the VLAN. Set the value to 0 to have an unlimited number of users.

   

   Note

   A blue override icon (to the left of a parameter) defines the parameter as having an override applied. To remove an override go to the Basic Configuration section of the device and click Clear Overrides. This removes all overrides from the device.
8. Click OK to save the changes and overrides.
   Click Reset to revert to the last saved configuration.