Addressed Issues in release 25.12.0-123 lists Addressed Issues in ExtremeCloud IQ 25.12.0-123.
| Issue ID | Description |
|---|---|
| CFDs | |
| CFD-17222 (03273811) | Addressed the issue where there were intermittent authentication failures by improving the IDM gateway reliability. |
| CFD-17314 (03270487) | Addressed the issue where the Usage in Bytes column in the Top Access Points By Usage downloadable report under did not match the Radio 5 GHz Usage in Bytes value shown in the equivalent scheduled report for the same time period. |
| CFD-17339 (03275916, 03268185) | Addressed the issue where the WiFi Channel Utilization and Connected Clients (My Clients) values displayed in the Wireless Interfaces monitoring graph were not accurately reflected in the accompanying table, and custom time range data fluctuated at regular intervals compared to the Day time range view. |
| CFD-17340 (03279781) | Addressed an issue where applying UZTNA SSID configuration to AP305C and AP410C access points running IQEngine versions earlier than 10.8.7 could remove required legacy RADIUS-over-TLS proxy settings, causing 802.1X authentication failures. |
| CFD-17388 (03281109) | Addressed the issue where the CSV export from the Client Monitor and Diagnosis page under Manage only included events visible on the current page rather than all events for the selected time range; the export now includes the full data set regardless of the current page position. |
| CFD-17467 (03279457) | Addressed an issue where EXOS switches with the same IP address configured for both the primary and secondary SNTP servers failed device initial collection. The table index has been updated to correctly distinguish between primary and secondary servers sharing the same IP address, allowing collection and configuration pushes to complete successfully. |
| CFD-17483 (03272596) | Resolved an issue where Tunnel Concentrator configurations could omit tunnels for some access points, preventing their tunneled traffic from being handled correctly. Configuration generation now includes the expected AP tunnel entries for large deployments. |
| CFD-17564 (03287829) | Addressed an issue where AP5020 access points experienced 802.1X authentication failures and SSID outages after upgrading to IQ Engine 10.8.7.0 due to a misconfigured UZTNA transport mode. The fix includes a per-SSID transport selector, letting admins choose between Direct Tunnel (10.8.7.0+) and Legacy Proxy (older firmware), with automatic exclusion of non-qualifying APs. |
| User Interface | |
| XCP-22984 | Addressed the issue where there were real-time synchronization issues on the Client Health page involving delays and discrepancies in client connection and disconnection status updates. |