BGP Routes Before Policy Application

The following example shows the routes in the BGP routing table at Router A after completing the configuration described in the previous two sections:

* Switch.52 # show bgp route all
Routes:
Destination       Peer           Next-Hop        LPref Weight MED    AS-Path
---------------------------------------------------------------------------------
*>i  172.16.1.0/24     10.10.10.2     10.10.10.2      100   1      0      64505
*>i  10.1.1.0/24       10.10.10.2     10.10.10.2      100   1      0      64505 64496 0
*>i  10.1.2.0/24       10.10.10.2     10.10.10.2      100   1      0      64505 64496 0
*>i  10.1.3.0/24       10.10.10.2     10.10.10.2      100   1      0      64505 64496 0
*>i  10.1.34.0/24      10.10.10.2     10.10.10.2      100   1      0      64505 64499
Flags: (*) Preferred BGP route, (>) Active, (d) Suppressed, (h) History
(s) Stale, (m) Multipath, (u) Unfeasible
Origin: (?) Incomplete, (e) EGP, (i) IGP
BGP Route Statistics
Total Rxed Routes : 5
Feasible Routes   : 5
Active Routes     : 5
Rejected Routes   : 0
Unfeasible Routes : 0
Route Statistics on Session Type
Routes from Int Peer: 0
Routes from Ext Peer: 5