Configuration Overview
You configure LLDP per port, and each port can store received information for a maximum of four neighbors.

Note
LLDP runs with link aggregation.
You can configure LLDP per port.
- Enable LLDP on the desired port(s) as described in Enable and Disable LLDP.
- If you want to change any default timer values, see Configure LLDP Timers.
- Enable the SNMP traps and configure the notification interval as described in Configure SNMP for LLDP.
-
Configure any optional TLV advertisements as described in
Configuring Optional TLV Advertisements.
Note
By default, an LLDP-enabled port advertises the optional system description TLV. By default, all other optional TLVs are not advertised.