Displaying Port PoE Statistics

To display the PoE statistics for each port, run the show inline-power stats ports port_list command. The command provides the following information:

State—Displays the port power state:
- Disabled
- Searching
- Delivering
- Faulted
- Disconnected
- Other
- Denied
PD‘s power class—Displays the class type of the connected PD:
- “-----”: disabled or searching
- “class0”: class 0 device
- “class1”: class 1 device
- “class2”: class 2 device
- “class3”: class 3 device
- “class4”: class 4 device
Absent—Displays the number of times the port was disconnected.
InvSig—Displays the number of times the port had an invalid signature.
Denied—Displays the number of times the port was denied.
Over-current—Displays the number of times the port entered an overcurrent state.
Short—Displays the number of times the port entered undercurrent state.

Published August 2016prev | next

Extreme Networks