I/O and Fabric Module LED Behavior--BlackDiamond X8 Switch

The following table describes the BlackDiamond X8 switch I/O and fabric module LED behavior during a diagnostic test.

After the I/O or Fabric module completes the diagnostic test, or the diagnostic test is terminated, the DIAG and the Status LEDs are reset. During normal operation, the DIAG LED is off and the Status LED blinks green.

Click to expand in new window

BlackDiamond X8 Series Switch I/O and Fabric Module LED Behavior

LED Color Indicates
DIAG Amber blinking Diagnostic test in progress
  Amber Diagnostic failure has occurred
Status Amber blinking Configuration error, code version error, or other severe module error
  Green blinking Normal operation