Configuring Host-Mobility

  • To enable host-mobility, use the following command:

    configure vrrp {vlan} vlan_name vrid vridval host-mobility [{on | off} {exclude-ports [add | delete] port_list}]

  • To enable redistribution of host-mobility routes to OSPF, use the following command:

    enable ospf export [bgp | direct | e-bgp | host-mobility |i-bgp | rip | static | isis | isis-level-1 | isis-level-1-external | isis-level-2 | isis-level-2-external] [cost cost type [ase-type-1 | ase-type-2] {tag number} | policy-map]

  • To define that host-mobility is the preferred route, use the command:

    configure iproute {ipv4} priority [blackhole | bootp | ebgp | host-mobility | ibgp | icmp | isis | isis-level-1 | isis-level-1-external | isis-level-2 | isis-level-2-external | mpls | ospf-as-external | ospf-extern1 | ospf-extern2 | ospf-inter | ospf-intra | rip | static host-mobility] priority {vr vrname}