Request Demo
Group Created with Sketch.
Search

Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

Configuring the NMS Server Software

The Extreme Management Center and Ridgeline include a RADIUS server that you can use for NMS server authentication. To configure this server, do the following:

  1. Add the IP address of each XNV-enabled switch as a RADIUS client.
  2. Add each VM MAC address as a username (in upper case and should not contain semicolon) and add the MAC address as the password.
  3. Add a remote access policy with the Extreme Networks VSAs:
    • Vendor code: 1916
    • VSA ID: 213 (EXTREME_VM_NAME)

      Example: MyVM1

    • VSA ID: 214 (EXTREME_VM_VPP_NAME)

      Example: nvpp1

    • VSA ID: 215 (EXTREME_VM_IP_ADDR)

      Example: 11.1.1.254

For instructions on configuring the Ridgeline RADIUS server, refer to the Ridgeline documentation.
Published November 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page