configure lldp ports system-capabilities

configure lldp ports [all | port_list] [advertise | no-advertise] system-capabilities

Description

Configures the Link Layer Discovery Protocol port to advertise or not to advertise its system capabilities to its neighbors.

Syntax Description

all Specifies all ports on the switch.
port_list Specifies one or more ports or slots and ports.
advertise Specifies to send the information to neighbors.
no-advertise Specifies not to send the information to neighbors.

Default

No advertise.

Usage Guidelines

When at least one VLAN exists with more than two ports, bridging is sent to enabled.

When at least one VLAN on the switch has IP forwarding enabled, the system automatically sets the router bit.

Example

The following command configures all ports to advertise system capability information to neighbors:

configure lldp ports all advertise system-capabilities

History

This command was first available in ExtremeXOS 11.2.

Platform Availability