Configuring Network VLAN Ports for VLAN Translation

Note
All traffic that exits a subscriber VLAN port uses the subscriber VLAN tag, unless the port is configured as untagged. There is no need to configure VLAN translation (from network to subscriber VLAN tag) on subscriber VLAN ports.-
To configure network VLAN ports for VLAN translation,
use the following command and specify the network VLAN and port
numbers:
configure {vlan} vlan_name | vlan_list add ports port_list private-vlan translated
-
If you want to later reconfigure a port that is configured
for VLAN translation so that it does not translate tags, use the following command and
specify either the tagged or the untagged
option:
configure {vlan} vlan_name | vlan_list add ports [port_list | all] {tagged | untagged} {{stpd} stpd_name} {dot1d | emistp | pvst-plus}}